One of the products of Taif Azarin Company is a laboratory polisher which is provided manually and automatically. You can see the types of this product on the product page and the relevant menu and get more detailed information about each one. For example, information such as that the Superpole series polishing machines are capable of abrasion and polishing of laboratory, metallographic, mineralogical, mining and ceramic samples. In this machine, sub and grounding operation is performed using anti-wear discs of smooth and grooved alloy and polishing process with spray or diamond paste, aluminium oxide or chromium oxide.

Polishing and Grinding

In this section, we will get more acquainted with one of the most widely used laboratory products, namely Saab and Polisher (polishing and grinding). Polisher or sub-geologist (sub-geological) Another geological equipment is a device that is adjusted from one or two rotating disks with a rotation speed of 50 to 500 revolutions per minute. Sandpaper or felt is installed on their disk and at the same time with the rapid rotation of the disk, thin samples are placed on it so that the sample surface is very smooth and clean. Some types of polishers are equipped with a device called a holder due to continuous use. Automatically grinds and smoothes the sample to the desired level. In mineralogical samples or preparation of thin sections, the cutting price of the sample is the same as for thin sections, but to prepare a polished section, a tool called XQ-2b hot mount must be used.
Polishing and Grinding machines have the ability to polish all stone and metal surfaces. Providing a smooth and scratch-free surface from polished sections, bringing the surface of thin sections to the minimum expected dimensions for viewing under a microscope is done by these devices.

Geological laboratory equipment

• Geological equipment is mainly divided into two groups
  Field geology equipment
  Laboratory identification equipment

We will read a little more about these two groups:

•  

• Field geology equipment

  Field geology equipment includes the tools and equipment that a geology researcher or student needs to collect field samples as well as geological and topographic data. Which includes simple products such as geological hammers to microscopes and polishing and grinding devices, etc.
  It is good to know that the machine for preparing thin sections of disco plan is available in two models of disco plan TS and disco plan SAS. The device is such that the small sample is first thinned by a holder or holder and cumin and then in the grinder by a micrometre controlled with the required thickness. Most of these devices have two or three vacuum holders and the engine speed is often 3000 rpm. The electricity of this equipment can be single-phase household or three power phases and according to the needs of the workshop, the need for a specific type of these is considered.

• 

  Laboratory identification equipment

  Equipment used for medical or non-medical diagnostics in laboratories falls into this category.
•  

• Where could I buy Polishing and Grinding laboratory equipment?

  Taif Azrin Company directly produces and sells all the products provided to you on the forthcoming website. All you have to do to buy or get more information about any of the laboratory equipment is call us at the phone numbers listed on the website or contact us via WhatsApp or Telegram and email.